Favorbud manufactures and installs warm aluminum doors for houses, offices, shops, facades, winter gardens, terraces, and entrance groups. These are structures selected for a specific opening, operating conditions, facade design, and thermal insulation requirements.
For each project, we select not only the warm aluminum profile, but also the entire assembled structure: the double-glazed unit, hardware, threshold, mounting assemblies, and sealing. This allows us to produce doors that open smoothly, fit tightly against the frame, operate reliably in daily use, and look harmonious within the facade of a house, office, or commercial space.
Warm aluminum doors are door structures made of thermal break profiles. Inside such a profile, there is a special insert that separates the outer and inner parts of the structure and reduces heat transfer through the metal. Due to this, the doors are suitable for street-facing entrances to heated rooms, as well as for facades, terraces, winter gardens, and entrance groups.
A warm profile is chosen for objects where doors come into contact with the street, frost, wind, or temperature fluctuations. Cold aluminum is used where there are no high requirements for heat conservation: in interior zones, vestibules, and unheated rooms.
A warm profile is only one part of a high-quality door structure. Thermal insulation is affected by the double-glazed unit, installation joint, sealing, hardware, threshold, and accuracy of measurements. If even one of these elements is chosen incorrectly, the structure can lose heat even with a high-quality profile.
| Characteristic | Explanation | Value |
|---|---|---|
| Mounting depth: | thickness of the door frame from its outer edge to the inner one | varies from 60 mm to 90 mm |
| Filling range | the thickness of the double-glazed unit or thermal panel installed in the door profile. | varies from 24mm to 56mm. |
| Sealing contours | continuous closed rows of elastic gaskets (mainly based on EPDM or silicone), integrated into special profile grooves for sealing the rebate zones (sash-to-frame connection) | 3 contours (outer, middle/central, and inner) |
| Profile thickness | wall thickness of the aluminum profile | from 1.8 mm to 2.0+ mm |
| Double-glazing fill width | The glazing unit filling width (total thickness of the glazing unit) is the total overall dimension of the translucent element in cross-section, measured from the outer plane of the first (exterior) glass to the outer plane of the last (interior) glass. | from 24 to 60 mm. |
| Thermal break width | Thickness of the special polyamide insert (reinforced with fiberglass) connecting the outer and inner parts of the aluminum profile | from 24 mm to 45+ mm. |
Such parameters make it possible to adapt the doors to various profile types, glazing options, loads, and architectural requirements.
The cost is determined individually for each object. The price is influenced by the size of the door opening, the type of thermal profile, the opening method, the double-glazed unit or sandwich panel, the profile color, hardware, and the presence of a door closer, lock, or access control system.
The complexity of installation, integration into the facade, winter garden or entrance group, as well as requirements for safety and appearance are also taken into account.
To get an exact price, request a custom calculation from Favorbud. We will take into account the dimensions, operating conditions, and design of the facility, and select the optimal configuration.
| Where is it installed | What are they suitable for | What to consider |
|---|---|---|
| Private houses | Front door, terrace exit, winter garden door | Thermal insulation, tightness, facade design |
| Cottages | Primary or secondary entrance | Reliability, double-glazed window, hardware |
| Offices | Entrances, facade entrances | Intensity of use, durability |
| Stores and showrooms | Glass entrance doors | Transparency, aesthetics, ease of passage |
| Restaurants and commercial properties | Entrances, exits to outdoor terraces | Durability, safety, ease of maintenance |
| Winter gardens | Doors in glass structures | Compatibility with facade or glazing system |
| Translucent facades | Integrated door structures | Node design and installation |
Aluminum doors with a thermal profile are best suited where the door contacts the street or an unheated area. They are appropriate for modern architecture, large glass surfaces, facade systems, and projects where aesthetics, strength, and durability are required.
Warm doors have more advantages for heated facilities, but before ordering, it is worth understanding their features.
| Flaw | What does this mean | How is this solved |
|---|---|---|
| Higher price compared to cold profile | The heating system is more complicated to manufacture | The configuration is selected according to the budget and task |
| Impact of installation quality | Even a good profile can lose efficiency with poor installation | Exact measurements, correct abutment joints, and sealing are required |
| Not always needed for interior zones | In unheated or interior areas, a cold profile is sometimes sufficient. | Favorbud helps to choose the appropriate type of construction |
Warm aluminum doors should be chosen when the doors separate a heated room from the street, the cold, or an unstable temperature zone.
Favorbud is a manufacturer and contractor that understands facade systems, glass, aluminum, entrance groups, winter gardens, translucent structures, and installation assemblies.
Benefits of cooperating with us:
✓ in-house expertise in glass and aluminum;
✓ door selection for a specific project;
✓ support at all stages: consultation, measurements, design, manufacturing, installation and service;
✓ professional installation for tightness and durability;
✓ the ability to combine the door with the facade, entrance group, or winter garden;
✓ practical selection of profile, double-glazed window, hardware, and components for your budget and task.
The client describes the task: a house, office, shop, facade, terrace, winter garden, or another object.
Favorbud clarifies the dimensions, type of construction, design preferences, profile, glass, and hardware.
Specialists check the opening, installation conditions, joints, and features of the facade or walls.
The profile, double-glazed unit, color, hardware, and opening type are selected.
Doors are made according to the project parameters.
The structure is installed, adjusted, tightness is checked, along with the operation of the hardware and the ease of opening.
Discussing project details, including wishes, needs, and budget. Signing a service agreement.
Creation of a detailed work plan, including structural design, budget development, and work schedule.
Production of custom-designed structures according to the project and execution of the full range of work for their installation at the customer's sites.
Official handover of the facility to the client with the signing of the acceptance certificate.
Each client receives attention according to their unique needs and requirements.
We guarantee prompt responses to customer inquiries and requests.
Our specialists have extensive experience and are highly qualified in maintenance and repair.
We adapt our services to meet any needs of our clients.
Our products and services ensure long service life and stability.
Contact us by phone +38 067 6797978, щоб замовити теплі алюмінієві двері з алюмінію будь-якої конструкції та розмірів. Ми виготовляємо двері за індивідуальними проєктами, а також пропонуємо інші алюмінієві конструкції — вікна, перегородки та розсувні системи для терас і балконів.
With solutions from Favorbud, your home will have a modern look, become energy efficient and as comfortable as possible for living.
Both the profile and the double-glazed unit are important for thermal insulation, but their roles are different. A thermally broken profile reduces heat transfer through the frame, while the double-glazed unit is responsible for retaining heat in the light-transmitting part of the door.
Hardware does not directly insulate the door the way a profile or double-glazed unit does. However, it affects the tightness of the sash compression, the absence of warping, airtightness, and the stable operation of the structure.
Yes, Favorbud manufactures aluminum doors for a specific project. The structure can be adapted by dimensions, color, opening type, filling, hardware, and installation requirements.
